How to extend the service life of the dispensing machine

For all equipment, whether daily maintenance is done well or not directly affects the service life of the equipment. The dispensing machine is no exception. So, in order to better extend the service life of the dispensing machine, what daily maintenance work needs to be done?

Fully automatic dispensing machine

1. If the air pressure intake is abnormal and water vapor is found, please remove the water vapor from the pressure regulating filter or check if there is any abnormality in the air pressure source. Before using a large amount of glue, please try using the dispensing machine in small quantities to master the product's usage skills and avoid errors. When there are no problems during testing, use a double liquid drip or double liquid filling machine for large-scale production; The vacuum pumping system vacuums and removes bubbles from the adhesive to eliminate them during the mixing process, or allows it to stand for 10-20 minutes before use, so that the bubbles generated during mixing are eliminated in a timely manner, and the more adhesive is mixed together.

2. When the machine is idle for a long time, the power should be unplugged, which not only prolongs the lifespan of the machine but also saves a lot of electricity bills. With the rapid development of industry, liquid control technology and dispensing equipment are constantly evolving towards ultra-high precision control, diversification, and specialization.

3. To replace the adhesive, the pipeline needs to be cleaned. At this point, first close the feed valve, open the discharge valve, discharge the remaining rubber material from the rubber bucket, close the discharge valve, open the feed valve, pour the cleaning solvent into the rubber storage bucket, activate the machine body, and press the solvent out and rinse according to the usual operating method.

4. Please regularly wipe the machine part clean to increase its service life. The more glue is mixed together, the faster the reaction and curing speed will be. Therefore, it is necessary to make a reasonable mix of glue according to the actual production situation, otherwise it will cause waste of glue. Eliminate accidents and improve production efficiency. Nowadays, liquid control technology and dispensing equipment are widely used in various production fields in modern industry.

In addition, the automatic dispensing machine needs to be cleaned properly after each use, wiping visible parts with alcohol, and lubricating frequently moving parts with engine oil or butter.

The above is the daily maintenance work that must be done for the dispensing machine. In order to better extend the service life of the automatic dispensing machine and save equipment costs, manufacturers must pay attention to the requirements of good maintenance work.