How to choose the appropriate dispensing machine for enterprises

In order to improve product production efficiency and reduce labor costs, many manufacturers have begun to use automated equipment to replace manual operations. For example, dispensing operations, after using automated equipment, can not only improve dispensing speed, but also control dispensing amount with extreme precision, stable and efficient, and its effect is far less than that of manual dispensing. But for many manufacturers who are new to automatic dispensing equipment, the most difficult thing is how to choose the dispensing machine that suits their products.

1、 Select according to adhesive

Ordinary glue is used for single component dispensing machines, AB glue uses dual liquid dispensing machines, PU glue uses PU glue dispensing machines, and UV glue uses specific syringe dispensing machines. In general, the corresponding dispensing machine type should be selected based on the type of glue required for the product.

2、 Select according to the dispensing process

For ordinary dispensing, semi-automatic dispensing machines (such as foot pedal control) are mostly used, while for precise positioning and marking, automated dispensing machines such as desktop, three-axis, and circle drawing machines are used. This mainly depends on the dispensing process required by the factory to select dispensing machines with different levels of automation.

3、 Choose based on work efficiency and environment

If there are few products and efficiency is not pursued, manual glue guns will be used; For outdoor work, a glue gun is often used. If precise control of the competition is required, machine control is used. If automated dispensing is required, machines with automated functions should be selected. Choosing a suitable dispensing machine based on work efficiency and working environment can not only save costs but also greatly improve the service life of the dispensing machine.

4、 Select based on cost

There are various dispensing solutions, not all dispensing requires machine operation, and not all automated dispensing must be attached to the dispensing machine. From a cost perspective, assuming that a certain type of adhesive needs to be used for machines at higher prices, it can be considered to replace the adhesive. This is mainly to save costs as much as possible without reducing the dispensing effect.

When choosing dispensing equipment, enterprises must choose the most suitable dispensing equipment based on their own product needs and financial strength. They should not blindly seek cheap prices to save costs, nor should they blindly choose high priced equipment for better dispensing effects. What is suitable is the best.